Lavskummende desinfiseringsmiddel.
Ny formel, så fargen er nå klar og kortere kontaktid (1 min).

A low foaming, final acid anionic rinse for use in the beverage and food industries. New improved formula.

• Leaves tanks and equipment spotless and avoids mineral build-up
• Not affected by organic soils
• Do not use on soft metals
• Only 60 sec contact time needed!
• Can be used in CIP systems
• Multilingual label
• Dosage: 30 ml / 19 litres

Directions for use
Use as a final rinse after thoroughly cleaning with a good alkaline cleaner such as PBW™. Use Saniclean™ at a rate of 30 ml per 19 l of water. Apply by spray or soak with a contact time of at least 1 minute. Empty or drain the recipient and let air dry. Close the packaging tightly after use and store in a dry, cool and well-ventilated place. Always keep containers upright to prevent leakage.

Keep out of reach of children.
DO NOT MIX SANICLEAN™ with chlorinated cleaners as chlorine gas will result.

Datablad - trykk her